Garmin G1000 Piper PA32 - Manual (Page 314)

Garmin G1000 Pilot’s Guide for Piper PA32 190-00692-00 Rev. B 6-34
HAZARD AVOIDANCE
Selecting a Stormscope range on the Navigation Map:
1) Press the MENU Key.
2) Select ‘MAP SETUP’.
3) Select the ‘Weather’ group.
4) Press the ENT Key.
5) Turn the large FMS Knob to select ‘STRMSCP SMBL’.
6) Turn the small FMS Knob to select the maximum display range.
7) Press the ENT Key.
8) Press the FMS Knob to return to the Navigation Map Page.
To change the display range on the Navigation Map Page, turn the Joystick clockwise to zoom out or
counter-clockwise to zoom in.
SELECTING THE STORMSCOPE PAGE
If Stormscope is installed, the Stormscope Page is the third rectangular icon in the Map group of pages.
Stormscope lightning data can be displayed at the ranges of 25 nm, 50 nm, 100 nm, and 200 nm.
Adjusting the Stormscope Map Range:
1) Select the Stormscope Page.
2) To change the map range, turn the Joystick clockwise to zoom out or counter-clockwise to zoom in.
Figure 6-42 Stormscope Page
Strike Rate
Map Orientation
Mode