Garmin G1000 Piper PA32 - Manual (Page 176)

GPS NAVIGATION
190-00692-00 Rev. B 5-42 Garmin G1000 Pilot’s Guide for Piper PA32
Selecting a direct-to from a list of waypoints in an active flight plan:
1) Press the Direct-to Key.
2) Highlight the FPL field.
3) Turn the small FMS Knob to display a selection window showing all waypoints in the active flight plan.
4) Scroll through the list and highlight the desired waypoint.
5) Press the ENT Key twice to activate the direct-to.
Selecting a direct-to from the nearest airports list:
1) Press the Direct-to Key.
2) Highlight the NRST field.
3) Turn the small FMS Knob to display a selection window showing the 25 nearest airports.
4) Scroll through the list and highlight the desired airport.
5) Press the ENT Key twice to activate the direct-to.
Selecting a specific course to a waypoint:
1) Press the Direct-to Key.
2) Enter the desired destination waypoint.
3) Press the ENT Key.
4) Highlight the ‘CRS’ field.
5) Enter the desired course.
6) Press the ENT Key twice to activate the direct-to using the selected course to the destination.
Clearing vertical constraints:
1) Press the MENU Key to display the Direct-to Menu.
2) Select ‘Clear Vertical Constraints’ (Figure 5-42). Press the ENT Key.
Figure 5-42 Clear Vertical Constraints Menu Option