AASTRA BluStar 8000i BAS-Mode Administrator Guides EN - Manual (Page 155)

Database Password
41-001391-00 Rev 03 – 04.2012 12-3
Default Administrator Password for All BluStar Devices
One of the first steps when starting to configure the BluStar Application Server through the Web UI should be to create an
administrator password for the All BluStar Devices group. This will allow administrators access to all devices utilizing one
default password. The default administrator password can be configured on the BluStar Devices :: BluStar Device
Groups page as shown below:
To create a default administrator password:
1. Click on the icon next to the All BluStar Devices group .
2. Enter a default administrator password in the New Password field under the Security Settings :: Administrator
password section.
3. Re-enter the default administrator password in the Confirm Password field under the Security Settings ::
Administrator password section.
4. When satisfied with the administrator password click Save.