AASTRA BluStar 8000i BAS-Mode Administrator Guides EN - Manual (Page 84)

BluStar Device Groups
6-9 41-001391-00 Rev 03 – 04.2012
BluStar Device Groups
This page is the starting point for managing BluStar Device groups. By default, the server is configured with the groups
shown above. The All BluStar Devices group is the top-level parent group and contains settings that affect all BluStar
8000i devices unless overridden for a particular device or child group. The remaining groups are child groups to the All
BluStar Devices group. These control settings for all devices of a particular type. The default groups cannot be deleted or
renamed.
To the right of each device group is a group of icons. Clicking on these allows the following operations to be performed:
Notes:
• For additional information on managing group settings, refer to Understanding Group Settings on page 5-11 .
• The device group settings listed below may differ depending on the software releases available on the BAS server.
Icon Description
Create New Device Group as Child of this Group
Rename this Group
Delete this Group
View Group Members
Edit Group Members
Change Member Priority
Edit Settings