Initial system configuration, Er to, The ap – AASTRA BluStar 8000i BAS-Mode Administrator Guides EN User Manual
Page 29: Software installation and network configuration
Advertising
Software Installation and Network Configuration
41-001391-00 Rev 03 – 04.2012
2-16
Most system management tasks can be performed remotely, i.e., across the network, using a web browser.
, describes how to use the web user interface, referred to as the Web UI in this guide.
Initial System Configuration
When all the required software has been installed on the BluStar Application Server, the initial configuration of the system
needs to be specified. The exact procedure will differ according to the network and system topology selected for each spe-
cific site.
Advertising