AASTRA BluStar 8000i BAS-Mode Administrator Guides EN - Manual (Page 82)

BluStar Device Status
6-7 41-001391-00 Rev 03 – 04.2012
To enter advanced parameters, log in to the BAS Web UI and navigate to the BluStar Devices :: BluStar Device Status
page. Select the applicable BluStar terminal device and enter the appropriate parameters in the Other Settings section
under the Own field.
Login Banners
Specify pre- and post-login banner text.
Miscellaneous BluStar Terminal Settings
Maximum Video Bandwidth Limit
This setting limits the video bandwidth for the terminal to the selected value (either 6000, 5000, 1500, 768, 384, or
128 kilobits per second).
Enable H264 VBR Mode
Enables or diables H.264 Variable Bit Rate (VBR) mode.
Maximum videoShare Bandwidth Limit
This setting limits the videoShare bandwidth for the terminal to the selected value (either 3000, 1500, 768, 384, 128
kilobits per second).
Maximum Thumbnail Video Bandwidth Limit
This setting limits the thumbnail video bandwidth for the terminal to the selected value (either 256, 128, 64, 16, 8
kilobits per second).
Preferred Audio Bandwidth Limit
Specifies the maximum audio bandwidth limit.
Maximum Collaboration docShare (Image) Bandwidth Limit
This setting limits the bandwidth for docShare images sent by the terminal to the selected value ( either 4000,
2000, 1000, or 500 kilobits per second).
Display Mouse Cursor
Displays the mouse cursor.
LDAP network timeout Used to set the network timeout for LDAP requests. A range of 1 to 120 is applicable.
For example, Setting_LDAP network timeout=50
LDAP initial download delay Used to set the LDAP initial download delay. Setting a value of 0 does not introduce any delay and the initial
download is performed synchronously during the login process. With all other values, the download is per-
formed asynchronously, delayed by the value amount (in seconds) after the login process. A range of 0 to 120
is applicable.
For example, Setting_LDAP initial download delay=60
Parameter Description