AASTRA BluStar 8000i BAS-Mode Administrator Guides EN - Manual (Page 16)

Software Installation and Network Configuration
2-3 41-001391-00 Rev 03 – 04.2012
To run the BluStar Application Server Configuration tool:
Network Configuration
Definition of basic networking parameters, e.g., IP address, hostname, DNS server(s), default gateway, and domain
names, is required before proceeding with any other server configuration operations.
1. Enter the following command at a command prompt:
./vconfig
2. A welcoming screen displays giving brief instructions for using the configuration tool. After reading the instructions,
press Enter to begin. The BluStar Application Server Configuration screen displays as shown:
The following operations may be initiated from this screen:
Network Configuration
Allows you to specify the network parameters for the network interfaces.
Network Connectivity Test
Tests for connectivity to the devices specified during Network Configuration.
Time Server
Allows you to set the BluStar ™ 8000i Desktop Media Phone’s timezone, time, and date parameters.
SSL Certificate Generation
Generates SSL certificates.
Software Installation
Installs the BluStar
™
8000i Desktop Media Phone software.
Current Software
Allows you to view a list of currently installed software packages.
Upgrade Software
Allows you to upgrade the software from a CD. This option displays only after initial installation of the software.
SSH Key Distribution
Exchanges SSH keys between the BluStar
™
8000i Desktop Media Phones in a High Availability pair.
Reboot
Allows you to reboot the BluStar ™ 8000i Desktop Media Phone.
Exit
Exits the BluStar Application Server Configuration program and returns you to a command prompt.
3. Continue with Network Configuration on page 2-3 .