AASTRA BluStar 8000i BAS-Mode Administrator Guides EN - Manual (Page 55)

User Accounts
41-001391-00 Rev 03 – 04.2012 5-6
Force Password Change
Forces the user to change the account password on next login.
Allowed Login Roles
Login roles the user is permitted to assume. The different roles are defined in User Roles on page 3-11 .
SIP Authentication Type
Type of authentication between SIP device and server. The various types are detailed in Authentication Types on
page 5-23 .
SIP Static URL
This setting is used for static SIP registration. Enter the SIP URL to which calls should be forwarded in this field.
Account Enabled
Specifies whether or not the user account is enabled. Unchecking this box will deactivate (prevent from logging in) a
user account until it is manually enabled again.
Security Settings
The settings shown in the lower portion of this panel are controlled by a series of buttons: Password Restraints,
Password Expiry, Account Lock, and Access Control.
Password Restraints
Allow User to Change Password
Permits the user to change the account password.
Enable CrackLib Password Testing
Prevents users from choosing easily guessed passwords.
Minimum Password Length
Sets the minimum number of characters that must be in a password. Setting this to “0” (zero) disables checking.
Minimum Number of Letters in Password
Sets the minimum number of letters that must be in a password. Setting this to “0” (zero) disables checking.
Note:
To use static SIP registration, the account’s Authentication Type must be configured as STATIC.