AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 38)

32
Registration
Switch the headset to "Pairing mode". Follow the User's Manual of the headset for this.
Switch on the function in Menu ❯❯❯ -> Settings -> Bluetooth -> BT Status.
Open the Menu ❯❯❯ -> Settings -> Bluetooth -> Subscribe headset and then press the New soft-
key.
The headset that is found is shown by its name on the display. Confirm the display with Ok and enter
the PIN of the headset. The headset is now logged in and the
symbol appears on the top line of
the display.
You can specify the active headset in the Menu ❯❯❯ -> Settings -> Bluetooth -> Select headset.
Telephoning via the Bluetooth headset
Answering a call:
Press the "Connect key" on the headset or the green call key on the handset. The
symbol is dis-
played.
Ending a call:
Press the "End key" on the headset or the End key
on the handset.
Making a call:
Enter the call number on the handset and press the "Connect key" on the headset or the green call
key on the handset.
Hands-free operation:
If you press the hands-free key
to answer a call or during a call, Bluetooth operation is interrup-
ted and the handset's loudspeaker/microphone is activated.
Answering a call on the headset:
During a call on the handset: Press the Connect key on the headset.
Transferring a call on the handset:
During a call on the headset: Press ❯❯❯ and select Transfer BT to handset.
For details of additional headset functions, please refer to the User's Guide for the device.
Note
If Bluetooth has been programmed on one of the keys, then pressing it carries out the following
functions.
•
Handset in idle status: Calls up the Bluetooth menu.
• During a call on the handset: Transfers the connection to the headset or back to the handset.
Basic functions