AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 91)

85
Please note: If your device supports the features Text messaging
and/or Paging, do not set any value under 3 seconds.
Handsfree
Allows you to answer the call in handsfree mode (activates the
loudspeaker). The In charger only or Always settings are used to
specify whether the handsfree feature should be activated only
when the handset is on the charger or also when you are carrying
the handset with you.
Microphone
Lets you answer the call automatically with or without activated
microphone. You can also activate the microphone after the call
using the softkey
.
LED indication
Lets you activate or deactivate the LED indication during a call.
Attention tone
Lets you activate or deactivate the attention tone at the start of
Auto answer.
Auto Quick Hook
If this feature is activated, a long keypress on an abbreviated dialling key (see
page 23 and page 29) dials the destination directly. A requirement is that the
relevant phone book entry comprises only one destination (private, business,
mobile, email or fax); if not, the list of entries is provided in call preparation.
Voice box no.
The number of your voice box is stored here. This call number is dialled if the 1 key is pres-
sed and held for a moment. If the call number of the voice box is administered by the tele-
phone system, this setting does not appear.
Bluetooth
Status Shows whether Bluetooth is activated or not. Press Change to activate or deacti-
vate.
Select headset
Select the subscribed headset you want to use from the list.
Subscribe headset
Press New to register a new headset for use on your handset. Also carry out the
necessary steps on the headset (see User's Manual for the headset).
The handset searches for any
Bluetooth devices within range for approx. 30 sec.
Select an entry, press Ok and enter the PIN of the headset. The "pairing" is star-
ted.
If you want to change the name or to delete a Bluetooth headset, select ...
Devices menu