AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 67)

61
Call filter
The call filter* allows you to answer or block incoming calls. You can specify the call numbers and
the filter status in the menu.
Call diversion
Call diversion enables you to forward calls to other internal / external phones. A call can be forwar-
ded immediately, when the connection is busy or after a certain time.
System
In this menu you can specify the active system for your handset and administer registrations to diffe-
rent systems as well as read the IPEI number and information on the status of hardware and soft-
ware.
System menu
This menu provides access to the communication system in order to make the appropriate settings
for your handset or the system as a whole.
Settings
Device settings, such as key lock, key programming, user name, display settings, illumination, Blue-
tooth etc., are available here.
Protection functions
This menu can be accessed via the PIN (Personal Identification Number). On delivery, it is 0-0-0-0 (4 x
zero). Here you can block the handset (lock), change the PIN, program an emergency number, enter
settings for the alarm sensor (in 630d / 632d only) as well as completely or partially reset the hand-
set to its state on delivery.
Profiles
This menu is used to create and administrate user profiles. Five modifiable profiles are preset.
Devices menu
* if supported by the system