AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 95)

89
Devices menu
VIP list Deletes the VIP list (see page 33).
New info Deletes the list with new information.
All lists All lists (call list, redial list, call list) are deleted after a confirmation prompt.
Key programming
All programmed keys will be reset to the status they had on delivery.
User settings
All the user settings (e.g. language, display settings) are reset to the factory set-
tings after a confirmation prompt.
All The handset is reset to the status it had on delivery after a confirmation
prompt. The registration of the handset on the system and the PIN are not
affected by this.
"Profiles" menu
When the handset is delivered it has four profiles with characteristic settings pre-programmed for
the "intended purpose". A fifth profile is available for further settings. You can change all profiles
and rename them if required. The activated profile is displayed behind the
symbol on the idle
display.
Select
No profile No profile can be used with this setting. The settings you select apply.
Normal Parameters for "normal" use are configured in this profile.
Headset Parameters for using a headset are preset in this profile.
Meeting Parameters for using the handset during a meeting are preset in this profile.
Loud Parameters for use in a particularly loud environment are preset in this profile.
<Profile 05>
This profile is available for your own use.
Settings Choose one of the profiles to make changes.
Profil name
Change the name of the profile if required.