AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 60)

54
Telephoning
To initiate a conference:
You have set up an enquiry call (see page 49)
c
If the subscriber answers, you announce the conference call.
Briefly press the❯❯❯ menu.
Use the navigation keys to select the 3 party menu entry.
To end a conference:
Press the end key (red). You are now switched out of the conference. The two remaining
participants can continue the call without you.
During a conference
Enquiry call and/or transfer during the conference
Each participant can make an enquiry call to another subscriber during a conference or forward the
conference to another subscriber (transfer).
Make an enquiry call to another subscriber (during the conference) as follows:
Press the R key
t
Key in the internal or external call number. Take note of the type of line seizure (see
page 41).
or
Briefly press the❯❯❯ menu.
Use the navigation keys to select the Select line menu entry and select the call key you
want (INTERNAL/EXTERNAL key, team direct call key or partner direct call key)
If you want to transfer the conference call:
Press the end key.
If you want to switch back into the conference call:
Briefly press the❯❯❯ menu.
Use the navigation keys to select the Select line menu entry and the select key for the
conference on hold