AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 73)

67
Devices menu
Signalling a set Alarm-clock call
You can use Pause to interrupt the signalling for an expired alarm call for 5
minutes. When you call up an alarm-clock call that has been put on Pause
(interrupted) you are offered Stop (to deactivate) and Pause (to maintain the
interruption).
Timer
Lets you set a countdown timer (max. 23 hours / 59 minutes). The time remaining until the
signalling occurs (using increasingly loud beep tones) is indicated on the display. The
timer’s ringer cannot be adjusted.
Format setting
Setting option for the display formats of the date and time.
Time format
Change the time format (24-hour or 12-hour am/pm)
Date format
Change the date format dd.mm.yy, e.g. 27.12.08
mm/dd/yy, e.g. 12/27/08
yy-mm-dd, e.g. 08-12-08
dd-mmm-yyyy, e.g. 27-Dec-2008
"Audio" menu
Open the menu, select Audio and press Ok.
Volume settings
Change the Volume at the selected menu item with the √ and ® navigation keys. Setting
range for the ringer: Off, Increasing, Level 1 ... 7
Note
Please note: The default settings for the Ringer Loudness ex-factory comply with regulatory
requirements. We recommend that the default setting is retained.
Earpiece Changes the currently set volume of the earpiece.
Handsfree Changes the currently set volume for handsfree operation.
Corded headset
Changes the currently set volume of a corded headset (does not apply to Blue-
tooth headset).
Internal call
Changes the currently set volume for calls from internal subscribers.