AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 65)

59
Devices menu
This section contains all the main features provided by the handset and the OpenCom 1000 commu-
nication system. The communication system also supports corded and other cordless phones, which
is why some menu entries have different designations even though they refer to the same thing.
More details are to be found in the descriptions that follow.
Please note that not all the features listed here are available on your handset as some authorisation
groups have to be enabled by your system administrator.
Besides the devices menu there are also status-related options menus which you can call up for
instance during a call to use some of the features available in that particular device state. Please
refer to the section entitled “Telephoning” for more details.
You can call up the Devices menu in the following ways:
• In Idle mode, briefly press ❯❯❯ .
• In Idle mode, press
and select Menu.
Notes on the display symbols in the menu
Save To make settings in the menu, you must open the respective setting window
with the Ok softkey. Your entry is then saved with the
softkey.
Information You can display further information on the entries with the softkey.
Options You can open further submenus (e.g. Delete, Edit) with the softkey.
Esc You can cancel entries with the Esc softkey and/or go one step back in the
menu.
Change With the Change softkey you can switch the hook in the check box on
(feature is on) or off.
You can display submenus for more feature settings.
Menu structure
The following sections illustrate the device features in the sequence they are displayed in the hand-
set menu. On the Aastra 612d, 622d, 632d, 650c, this applies to the set “Standard” menu structure.
For these devices different arrangements of the menu items can also be set (see page 82). If you
have set a different menu structure (i.e. not “Standard”), then please use the menu trees shown in
the appendix to help you find certain features.
Devices menu