AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 39)

33
• If a Bluetooth connection is interrupted because you have exceeded its operating range, you can
restore the connection by switching the headset off and back on again (once you are back wit-
hin range).
Special key (Hotkey) /VIP list
(not Aastra 610d, 612d)
On delivery the special key (hotkey) at the top right of the 620d, 622d, 630d, 632d and 650c hand-
sets is prepared as VIP phone book/VIP list for saving up to six telephones to be available very
quickly (the key can be reprogrammed).
To program your favourite call numbers briefly press the hotkey and select <New Entry>.
Enter the name and the call number.
To dial these call numbers briefly press the hotkey, select the desired entry and press the call key
: the call will be set up.
Note
You can also program the VIP list with phone numbers using the Directories menu (see page 65).
VIP list
(Aastra 610d, 612d)
The programmable keys of the Aastra 610d, 612d can also be assigned with a VIP phone book. To do
so, program one of these keys as described on page 97 and then save the name and phone number
as described in the previous paragraph (or in the Directories menu).
Profiles
Profiles consist of a group of handset settings each assigned to a particular situation or application.
For instance you can switch from “Normal” mode (e.g. in the office) to “Loud” mode when you enter
a different environment (e.g. a factory floor). As a result of the switch, features such as ringer
volume, vibra call, speech quality, LED signalling, etc., adapt to the new environment. Your handset
has five profiles.
While they are predefined, they can be changed at any time. If required, change the default settings
to suit your handset applications (see page 89).
Note
If when a profile is activated you change a number of features contained in the profile using the nor-
mal menu access (e.g. using ❯❯❯ Audio > Volume settings), the settings are adopted by the profile.
Basic functions