Hotchkis 22400 Toyota Celica Sport Sway Bar Set User Manual
Installation of hotchkis front sway bar
22400 STREET SWAY BAR SET
00-UP TOYOTA CELICA
Thank you for your purchase from our line of Toyota Celica parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding the service or
installation of your Hotchkis products. Visit us online
Hotchkis recommends that this sway bar set be installed by a professional, as the front
sway bar can only be removed or installed by detaching the front engine cradle and
lowering it from the vehicle!
Tools required for this installation:
Hydraulic jack, jack stands, torque wrench
The following sockets or wrenches: 12mm, 14mm, 17mm, 19mm
The following Allen wrenches: 6mm
Suggested tools: 6” socket extension, swivel ratchet
INSTALLATION OF HOTCHKIS FRONT SWAY BAR
1)
Securely block the rear wheels of the vehicle. Use a jack to lift up the front of the vehicle and
use jack stands to support it. Do not remove the front wheels during installation for safety.
2)
Use a 14mm wrench and 6mm Allen wrench to remove the nuts holding the end links to the
ends of the stock sway bar. Remove the end links from the ends of the sway bar. Retain the
hard ware for later use.
Document Outline
- U22400 STREET SWAY BAR SET
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?