Hotchkis 22400 Toyota Celica Sport Sway Bar Set - Manual (Page 5)

11) Replace all the hardware removed earlier to secure the cradle again. Reverse steps 3-6. Start
by re-attaching the steering rack to the cradle using a 17mm wrench or socket. You may need
help with this step as you’ll have to support the cradle a bit to line it up and get the bolts started
through the holes. Torque the hardware to 45 ft/lbs.
With the steering rack attached and tight, you can line up and start the remaining hardware. Leave the
hardware loose until all cradle bolts are in place. Replace the hardware mounting the cradle to the
lower engine mount and the front of the cradle to the radiator support.
Replace the four large bolts connecting the cradle to the sub-frame. You may need to use a large pick
or other tool to align the sub-frame and cradle in order to start the bolt into the sub-frame.