Hotchkis 22400 Toyota Celica Sport Sway Bar Set - Manual (Page 3)

5) Use a 14mm wrench or socket to remove the three bolts holding the front of the cradle
assembly to the radiator support. Retain the hardware for later re-installation.
6) Use a 17mm wrench or socket to remove the four bolts holding the steering rack to the cradle.
Retain the hardware for later re-installation.
7) With all the bolts removed the cradle should droop loosely enough to reach the sway bar
mounted to the top rear portion of the cradle. Use a 12mm socket or wrench to loosen and
remove the four bolts holding the stock sway bar in place. Remove the stock sway bar,
bushings and brackets. Retain the stock hardware for later re-installation.