Ohaus I150-S Indicator - Manual (Page 27)

27
Unit Selection Unit Selection Unit Selection Unit Selection Unit Selection
The I150 provides four weighing units
which may be used for weighing opera-
tions; lb, kg, oz and a custom unit. This
parameter selects which weighing units
will be available for use during operation.
Each weighing unit is turned ON or OFF
as explained in the following procedure:
1. When you access this parameter,
the display will show the word “Unit”
along with the KG unit indicator.
2. Press ENTER to display the current
status.
3. To change the status, press UPUP or
DOWN to display the desired setting,
then press ENTER .
4. Press UPUP or DOWN to switch to
the next unit and repeat steps 2 and
3.
5. When finished, press UPUP or DOWN
until “End” is displayed.
6. Press ENTER to save your selec-
tions and return to the scale sub-
menu.
LFT NOTE: LFT NOTE: LFT NOTE: LFT NOTE: LFT NOTE: Only lb or kg are available for
Legal for trade installations.
Custom Unit
Indicator
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER