Ohaus I150-S Indicator - Manual (Page 40)

40
RS-232 SUBMENU RS-232 SUBMENU RS-232 SUBMENU RS-232 SUBMENU RS-232 SUBMENU
The RS-232 submenu is used to configure the interface communication parameters.
The following table shows the sequence in which the parameters appear on the
display.
RS-232 SUBMENU RS-232 SUBMENU RS-232 SUBMENU RS-232 SUBMENU RS-232 SUBMENU
Displayed Parameter Displayed Parameter Displayed Parameter Displayed Parameter Displayed Parameter Description Description Description Description Description
specifies baud rate
specifies number of data bits to be used
specifies number of stop bits to be used
specifies parity type, if any
used to specify sample size for parts
counting with an auxiliary sample scale
enables/disables Auto print feature
specifies a range of displayed weight
values that cannot be printed, and/or a
time interval for automatic output of
displayed data
enables/disables printing stable-data-
only feature
used to select display data or block
data for output
Specifies numeric only or full display
data for output
used to include/exclude time on output
used to include/exclude date on output
used to exit the rs-232 submenu
* Only appears in submenu if Auto print feature is enabled
** Only appears in submenu if display data is selected for Print parameter
*
**