Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA Ford (03-09), Chevy (01-08), Dodge (03-07) User Manual
Page 26
26
96801 v.9.0
1.
Press the center button on the
5-way navigator to move to the
System Menu. The two System Menu
screens have eleven labeled touch
screen buttons. See Figure 37 and 38.
2.
To navigate between screens,
touch the ‘More>’ or ‘<Back’ buttons.
Further discussion of each field will be
covered later in the manual. Refer to
Section 9 for additional information.
-END, SEcTION 7-
Section 7
SYSTEM MENU
Figure 37
Figure 38
The Tungsten E2 also has a user
selectable ‘power save‘ feature that
can be programmed by the user.
1.
From the Tungsten E2 Home
Screen (‘Home’ key), scroll down and
locate the ‘Prefs’ icon.
2.
Touch the ‘Prefs’ icon. See Figure
39.
3.
Touch the button labeled ‘Power’
to enter the edit page. See Figure 40.
4.
Touch the button labeled ‘Auto-off
after’. See Figure 41.
5.
Select from the following: 30
seconds, 1 minute, 2 minutes, and 3
minutes. This setting sets the Power
Save time limit. See Figure 42.
Section 8
PoWER SAVE SETTINg
Figure 39