Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA Ford (03-09), Chevy (01-08), Dodge (03-07) - Manual (Page 5)

96801 v.9.0
5
The Banks PowerPDA will need to be
charged for a minimum of one hour
before the unit will function. The Banks
PowerPDA can be charged either by
the supplied Ac-outlet wall charger or
by the integrated charging cable in the
Docking Station. The unit will be fully
charged in one to two hours. After a
minimum charge of one hour, press
the power button to turn on the Banks
PowerPDA. See Figure 1 & 2. Follow
the on-screen instructions to set-
up the Banks PowerPDA. The Banks
PowerPDA will ask for time, date, time
zone and require that you perform
an on-screen stylus accuracy test.
See Figure 3 & 4. Once initial setup
is complete the Banks PowerPDA will
be ready for the Banks PowerPDA
software installation.
-END, SEcTION 1-
Section 1
ChARgINg ThE PDA
Figure 2
Figure 3 Figure 4
EXPANSION SLOT POWER BUTTON