Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA Ford (03-09), Chevy (01-08), Dodge (03-07) - Manual (Page 36)

36
96801 v.9.0
10.
To save the currently displayed
value, touch the button labeled ‘Save’.
11.
Touch the button labeled ‘<Back’
to exit the ‘Modify Tuning Parameter’
screen.
NOTE: Repeat steps 6 thru 11 to
modify any additional available tuning
parameters.
-END, SEcTION 14-
Figure 62 Figure 61
1.
Press the center button on the
5-way navigator to take you the the
System Menu screen.
2.
Touch the button labeled ‘More>’
to move to the second screen of the
System Menu.
3.
Next, touch the ‘Self Diagnostics’
button. See Figure 63.
4.
The ‘Self Diagnostics’ screen displays
a log of diagnostic events related to the
Six-Gun tuner. See Figure 64.
The ‘Logged Events’ list takes a moment
to update each time this screen is
opened (as indicated by a slight flickering
of the list). Once the list is updated,
the most current event will appear at
the top of the list. Each event has on
associated timestamp and description,
which will be displayed below the list
when that event is highlighted. Each
key cycle of the vehicle produces a
minimum of two logged events.
5.
Touch the button labeled ‘Down’ to
scroll down through the recorded
events.
6.
Touch the button labeled ‘Up’ to
scroll up through the recorded events.
7.
Touch the ‘Back’ button to return
to the System Monitor screen.
Section 15
SELF DIAgNoSTICS