Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA Ford (03-09), Chevy (01-08), Dodge (03-07) User Manual
Page 41
96801 v.9.0
41
6.
To set the operating hours for
daytime operation, press the ‘Next’
button to go to LcD Properties 3 of 3.
See Figure 72.
7.
Touch the ‘Adjust Hours’ and Adjust
Minutes’ buttons, to set the Start and
End of Daytime Auto Dimming Feature.
8.
Touch the ‘Done’ button to save
and exit the LCD Properties, Auto
Dimming Features.
NOTE: If your current LCD
brightness is set to 0% you will get
a ‘LCD Brightness Warning’. It is
recommended this be set to 100% for
daytime operation. Touch the ‘Leave
As-Is’ or ‘Set To 100%’ button, to
select. See Figure 73.
-END, SEcTION 18-
1.
To exit the Banks PowerPDA
application touch the ‘Home’ key
located on the silk screen portion of
the Banks PowerPDA. See Figure 1.
2.
Touching the ’Home’ key will exit
the Banks Application and take you
to the Tungsten E2 main screen
Figure 74.
3.
On the main screen you will see
icons of installed programs. Touch
the ‘Banks’ icon to re-open the Banks
PowerPDA application.
-END, SEcTION 19-
Section 19
EXITINg ThE BANKS PoWERPDA APPLICATIoN
Figure 74
Figure 73
Figure 72