Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA Ford (03-09), Chevy (01-08), Dodge (03-07) - Manual (Page 34)

34
96801 v.9.0
After choosing the desired
Performance Test the Banks PowerPDA
will acknowledge by displaying“
PERFORMANcE TEST ARMED” in the
Status Window on the System Monitor
screen. See Figure 55.
Banks PowerPDA will begin the
Performance Test once it detects
motion of the vehicle. The Banks
PowerPDA will monitor the elapsed
event until the pre-selected distance
or speed is reached. Upon completion
of the selected Perfomance Test, the
Banks PowerPDA will automatically
display a “results” screen, which
includes elapsed time/distance
parameters along with a graph of
EGT/Boost/MPH for the run. Each
completed Performance Test will
be saved for future analysis.
Viewing Saved Performance Tests
4.
To view a previously completed
Performance Test touch the button
labeled ‘Recall Saved’. See Figure 54.
5.
Use the Up and Down buttons to
select the Performance Test you want
to review. See Figure 56.
6.
Touch the button labeled ‘Open’, to
view in detail the results of the saved
Performance Test.
Use the’ <PREV’ and ‘NEXT>’ buttons
to move the curser one frame at a time
in the displayed graph area. Moving
between the frames will automatically
update the displayed parameter values.
See Figure 57.
7.
Press ‘Done’ when finished.
8.
For further information touch
the button labeled ‘Help’ on the
Performance Tests screen.
9.
Touch the button labeled ‘Back’ to
return to the System Monitor screen.
Deleting Saved Performance Tests
10.
To delete a previously saved
Performance Test, highlight the saved
test you wish to delete and touch the
button labeled ‘Delete’.
11.
A pop up window labeled ‘confirm
Delete’ will ask you to confirm the
deletion of the test. See Figure 58.
12.
Touch the button labeled ‘Yes’ to
confirm or ‘No’ to decline.
-END, SEcTION 13-
Figure 57
Figure 58