Grain Systems PNEG-366 User Manual
Page 20
Advertising
![background image](/manuals/277545/20/background.png)
Grain Systems, Inc. Assumption, Ill.
20
18' Autoflow
"C" CHANNEL INSTALLATION
Fasten the rolled "C" eave members to the wall brackets in the upper 2 holes of the top set of three (3) holes leaving the
bolts loose.
Install the splice plates at the rolled "C" eave member seams using 3/8" x 1" flanged hex bolts and nuts. Install bolts
as shown below. Tighten all bolts.
"C" Channel Attachment.
Figure #20
TD-100763
Eave "C" Channel
TD-100763
Eave "C" Channel
TD-100688
Eave Splice
REV. 11-20-96
Advertising