Grain Systems PNEG-366 - Manual (Page 42)

Grain Systems, Inc. Assumption, Ill.
42
18' Autoflow
OverFlow Level Switch
TAF-6103
5
30º Roof Panel
Figure #50
3
4
1
2
Key Part No. Description Quantity Weight
1 TD-100076 Rotary Switch Power-Pak 1 3.50
2 TD-100627 Roof Mount Coupling Weldment 1 2.14
3 TD-100075 Flex-Coupling 1 0.50
4 S-7241 1/8" x 1.1/4" Cotter Pin 2 0.02
5 TAF-6086 3-Vane Paddle 1 0.75
* TAF-6097 Hardware Package 1 0.98
-- PNEG-300 Rotary Switch Instructions 1 0.04
-- S-275 5/16" - 18 x 3/4" Bin Bolt 6 0.16
-- S-3651 Tube Seal 1 0.74
-- S-396 5/16" - 18 Hex Nut 6 0.06
-- S-7241 1/8" x 1.1/4" Cotter Pin 2 0.02
REV. 11-20-96
* Hardware Package not
shown
- Included in Hardware
Package
INSTALLATION OF OPTIONAL ROOF-MOUNTED LEVEL SWITCHES
Attach flex-coupling to the power-pak and install roll pin. Apply teflon tape or pipe sealant (not included) to power-
pak pipe threads and thread power-pak into mounting plate coupling. Conduit opening in power-pak should be at right
angles to roof rib or face toward eave.
Caulk underside of mounting plate above and both sides of 2" hole. Bolt to roof panel.