Grain Systems PNEG-366 - Manual (Page 26)

Grain Systems, Inc. Assumption, Ill.
26
18' Autoflow
Install the discharge plate assemblies over the flashing with a fender washer and nuts letting the bottom
bracket rest against the flashing. Screw the discharge plate together where they overlap with #10 self-drilling
screws (S-280).
DISCHARGE PLATE INSTALLATION
TD-100648
Eave Flashing
Fender Washer
(S-3671)
5/16" x 1.1/4" Bin
Bolts with nuts
TAF-6112
Discharge Plate
TD-100588
Bottom Bracket for
Discharge Plate
Figure #29
REV. 11-20-96