7 alarm settings, 8 network operation – ZMODO ZMD-DC-SBN6 16 Channel Standalone DVR User Manual

Page 16

background image

7 Alarm Settings

Please make sure that the alarm input and output cables are connected correctly. Please refer to II.6 Rear

Panel Connection for details.

Select<Tool Bar>→<System>→<Alarm Setting> to configure alarm parameters in the pop-up screen.

Note: All the settings will take effect after being saved
1) Alarm Input
The alarm input attribution includes N/O. and N/C. Please select a suitable attribution according to the types

of alarm device connected and control modes of alarm device adopted.

N/O.: Normally open. Circuit connected when alarm single triggered.

N/C.: Normally connected. Open when alarm single triggered.
2) Alarm linkage
The alarm triggered event handling include: record/alarm output/PTZ/sound output/alarm zoom

out/E-mail/report to center/FPT upload file. The channel alarm input can zoom display interval 1-10s optional.

If the display interval time is set to off, the zoom display will be invalid.

After using the “zoom out image” ,Alarm zoom out, report to center, IE client preview will zoom out


Note1: if user wants to set alarm triggered record, please set the record schedule first at “Record


Note2: if user wants to set alarm triggered PTZ, please select the channel number first, and then to set

(only preset 1 can be selected).

Note3::After alarm, email will be sent immediately with the attachment of the caught snapshot.

Note4: Once FTP server is set, FTP will upload file after the alarm. FTP server will receive the caught

3) Alarm Defence and Schechle
User can enable customized schedule in advanced menu, which is similar with the schechle of record .In the

alarm defence status, the icon of alarm input will appear as yellow.
Select < DEVICE EXCEPTION ACTION >→Enter Device exception handle screen. Choose among these

three options: HDD full, network disconnect, and IP conflict. For the hard full setting, user can select “alarm

output”/ “sound”/ “report to center”/ “email”. Network disconnect and IP conflict can only be set to “alarm

output”/ “sound”. After this setting has been saved, device exception will be handled the way user has


8 Network operation

1) Network settings
Please enter<Tool Bar>→<System>→<Network Setting>→<Network Connection>, there are three
connection types: Static IP, DHCP and PPPoE.
*Static IP:If this type selected, please type in IP address, subnet mask, and gateway. User can ping network
to check its connection status.
*DHCP:If this type selected, a DHCP server should be set in network. A dynamic IP of device will be
assigned automatically and displayed on IP Address column.
*PPPoE:Click 【>>】, the PPPoE setup screen will appear. Type in user name and password and click

OK】 to confirm. System will dial automatically. After accomplishing dialing, the IP address will be assigned

and displayed automatically on IP Address column. User can save the user name and passwordeven if the
dialing is not successed.
The following are types of ports:
*HTTP Port:It is the port number of browsing through IE. Default is 80.
*Signal Port:It is the first entry port for communication between web client and device, which is mainly used
for controlling of log-in, log-out, real-time preview, remote playback, and remote download, etc.
*Media Port:It is for media stream transmitting including real-time stream, voice stream and file stream etc.
*DDNS:Click 【>>】, the DDNS setup screen will appear. Slect a DDNS server and type in the DDNS
address,user name and password.
Auto Registration: SlectactivatingAuto Register and click【>>】,the register setup screen will appear. Type in
the register server IP,port and register interval time.
*File sharing: After activating file sharing function, the PC is able to access video files in DVR HDD via
network neighborhood