ZMODO ZMD-DC-SBN6 16 Channel Standalone DVR - Manual (Page 18)

17
*Server
It includes the configuration of server, network, and version information. All of these configurations can be set
in [Tool Bar]→[System].
Note: If the DHCP mode selected, the IP address is assigned automatically without being modified.
*Channel
User can set motion detection, video loss, OSD, image bit rate and frame rate, image parameters and record
schedule here.
Note: User is allowed to set single channel first, and then to copy the settings to the other channels.
*Serial
User can set PTZ protocol, baud rate, and address code here. All of these settings can be done by selecting
from [Tool Bar]→[System]→[VideoSetting].
*Alarm
User can set IO alarm and event handling here. All of these settings can be done by selecting from [Tool
Bar]→[System]→[Alarm Setting].
*User Management
Including user authority and password setting. Relevant interface information should be <Tool Bar>→
<System>→<System Setting>→【Advanced Setting>>】
The description of icons from left to right is:
Configure device parameters.
Search and playback record files.
View logs and export them.
Set the storage directory of record files.
Click to switch image view modes among full-screen, single split view mode and 4/8/9 splits view mode.
Log-out, restart device, Clear alarm
*Alarm Notification
When network connection is broken or abnormal, the alarm notification of “No heartbeat of device, please
check the network!” will be displayed in the right up side of the main screen. After recovery of network, the
preview will be displayedautomatically.
When alarms ofremote notification occur, the alarm notification with alarm input number contained such as
“Device alarm: IO alarm, IO input x” will be displayed in the right up side of the main screen.
When alarms of motion detection with remote notification occur, the alarm notification with the alarm channel
number contained such as “Device alarm: motion detection, channel 1” will be displayed in the right up side of
the main screen.
When alarms of video loss with uploading to center occur, the alarm notification with the alarm channel
number contained such as “Device alarm: video loss, channel x” will be displayed in the right up side of the
main screen.
*Preview
， ：Adjust image contrast up/down.
， ：Adjust brightness up/down.
：Start/stop voice monitoring. The icon will turn to green whensound monitoring.
：Start/stop recording. The icon will turn to green when recording.
：Click to snapshot.
：Stop preview.
Note: Click to set the storage directory of record files and pictures captured.
*PTZ Setting
The PTZ setting of client web is similar as the PTZ operation of local device, please refer to IV.5.1 PTZ
Control.
Note: IE side supports 3 auxiliaries setting.
4) Device Parameters Settings
Click , the parameters configuration screen will appear. All of the configurations are divided into the
following six selections:
*Address
Display the DVR IP address.
*Tool Bar