Ocean Optics OOIBase32 - Manual (Page 125)

C: File Formats
The information provided in an Experimental Parameters File includes settings information such as the
active display settings file and the spectrometer configuration file in use when OOIBase32 saved the
experiment. Additional information includes data about each spectrometer channel in your setup. The file
notes whether or not you enabled each channel (1 if enabled, 0 if disabled), and whether or not you stored
a dark or reference spectra (1 if stored, 0 if not stored). The file also names the saved files of the dark,
reference, and sample spectra.
An example of an Experimental Parameters File follows:
[Acquisition Parameters]
Integration Time=100
Flash Delay=100
Boxcar=3
Averages=1
Correct Dark=0
External Trigger=0
Time Normalized=0
Color Temperature=3100.000000000000000
ADC1000Rotation=0
View Mode=Scope Mode
[Settings]
Display File=default.display
Spectrometer File=C:\Program Files\Ocean Optics\OOIBase32\Default.spec
[Autosave]
Enabled=0
BaseFilename=OOIBase32DataFile
Index=0
[Overlay0]
Active=0
Filename=
[Overlay1]
Active=0
Filename=
[Overlay2]
Active=0
Filename=
[Overlay3]
Active=0
Filename=
[Overlay4]
Active=0
Filename=
[Overlay5]
Active=0
Filename=
[Overlay6]
Active=0
Filename=
[Overlay7]
Active=0
Filename=
[Channel0]
Enabled=1
Dark Stored=0
Reference Stored=0
Sample Dark Stored=0
Dark Filename=
000-20000-020-02-0505 115