Ocean Optics OOIBase32 - Manual (Page 27)

3: File Menu Functions
Processed
- General Functions Toolbar
Processed spectra are spectra taken while in scope, absorbance, transmission, or relative irradiance mode.
You can take these spectra after taking dark and reference spectra. When selecting a processed spectrum,
the active spectral window goes into snapshot mode and data acquisition stops. To resume acquisition,
select the snapshot icon from the Spectrum Controls toolbar.
Select File | Open | Processed to select and open one or more processed spectra.
Experiment
Opening an experiment loads the stored dark, reference, sample, and processed spectra, along with all
overlays and acquisition parameters in the experiment
Select File | Open | Experiment to select and open a complete set of acquisition and processing
parameters for the active spectral window.
Close
Select File | Close to immediately close the active spectral window. OOIBase32 does not prompt you to
save acquisition parameters or the spectra.
Save
This menu option allows you to save different types of data in a variety of file types (including Processed
Spectra, Grams/32 SPC Files, or All Files - available under the Files of Type option in the Save dialog
box).
To save specific file types, select File | Save from the menu. OOIBase32 saves all active channels in the
spectral window.
Note
You can name saved spectra automatically by enabling the Autoincrement Filenames
function. If you do not enable the Autoincrement Filenames function, a save file dialog
box will open every time you instruct OOIBase32 to save data.
000-20000-020-02-0505 17