Ocean Optics OOIBase32 - Manual (Page 19)

2: Configuring OOIBase32
This dialog box prompts your to enter a user name and serial number, which OOIBase32 places in the
header of certain data files. You can change this information later by selecting Edit | Settings from the
menu, and then selecting the Registration tab.
Since OOIBase32 is free software, it requires no serial number for installation. You can leave the field as
is.
Default Spectrometer Configuration File
The following message box appears:
Click the OK button. A dialog box opens, prompting you to identify a default spectrometer configuration
file.
► Procedure
1. Navigate to the OOIBase32 installation directory.
2. Choose the file with the .SPEC extension. The serial number of your spectrometer precedes
this file (for example, A1B234.spec).
Configure Hardware
The Configure Hardware screen normally appears automatically for an initial OOIBase32 software
installation. If it does not, select Spectrometer | Open Configuration from the menu. Use this screen to
select the type of spectrometer, A/D converter, and PCI card being used in your system.
000-20000-020-02-0505 9