Ocean Optics OOIBase32 - Manual (Page 139)

Index
S
(Cont'd)
Scope Mode Minus Dark, 70
Scope Mode Saturation Threshold, 29
Script Menu, 83
Script-defined Custom Mode, 72
Second Coefficient, 50
Select Bitmap, 39
Select to add overlay, 47
Selected Spectrometer Channels, 21
Serial Number
software, 28
Set Scale, 38
Settings, 13, 22
Show Overlay Filename, 45
Show Values in Status Bar, 68, 76
Signal to Noise, 53
Single Exposure, 62
Single Point, 55
Single-threaded Acquisition, 65
Snapshot, 62
Sounds, 25
Spectra to Average, 65
Spectral Data File Format, 113
Spectral View Mode Icons, 106
Spectrometer Configuration, 10, 49
A/D Interface Tab, 51
Detector Linearity Tab, 57
Reference Monitoring Tab, 52
Stray Light Correction Tab, 56
Spectrometer Configuration dialog box, 51, 52,
56, 57
Spectrometer Configuration file, 50, 58
Spectrometer Configuration File Format, 119
Initialized, 119
Spectrometer Menu, 49
Configure, 49
Open Configuration, 58
Save Configuration As, 59
Wavelength Calibration Tab, 49
Spectrum Control Icons, 104
Spectrum Menu, 61
Absorbance Mode, 70
Configure Data Acquisition, 64
Emergency Reset, 62
Global, 63
Reference Color Temperature, 72
Relative Irradiance Mode, 71
Scope Mode, 69
Scope Mode Minus Dark, 70
Script-defined Custom Mode, 72
Single Exposure, 62
Snapshop, 62
Specular Reflection Mode, 72
Store Dark, 61
Store Reference, 61
Take Log of Vertical Scale, 73
Time Normalized Intensity, 73
Transmission Mode, 71
Spectrum Scale, 36
Autoscale, 37
Set Scale, 38
Unscale, 38
Specular Reflection Mode, 72
Standard, 23
Start
Time Acquisition, 80
Start Time Acquisition, 107, 111
Stop
Time Acquisition, 81
Store Dark, 61
Store Global Dark, 63
Store Global Reference, 63
Store Reference, 61, 74
Store Reference Dark, 74
Store Sample Dark, 74
Stray light, 56
Stray Light Correction, 56
Stream and Autosave Filename, 76
Stream Data to Disk, 68, 76
Stream File Format, 123
Strobe Enable, 67
Strobe Tab, 66
Suspend Graph Display, 81
T
Take Log of Vertical Scale, 73
Third Coefficient, 50
Tile Horizontally, 83
Tile Vertically, 83
Time Acquisition, 88, 97
Activate, 80
Configure, 75
Configure Time Channels, 77
Pause, 81
Restore Parameters, 80
Save Data, 81
Save Parameters, 80
000-20000-020-02-0505 129