Universal Audio Realtime Rack - Manual (Page 100)

Realtime Rack Manual Chapter 4: Realtime Rack Application 100
Snapshot Versus System Contents
The table details the information that is stored in a Snapshot file and the differences
between a Snapshot and what is stored within the system.
Settings Stored In Snapshots
(changed when Snapshot is recalled)
Settings Stored In System
(persist when Snapshot is recalled)
Snapshot name
Snapshot MIDI Program Change number
Snapshot BPM (Tempo)
Session channel-count (16, 32, 48, or 64)
Plug-ins and settings per-channel (includes all
parameters and DSP power state)
Input and Output Gain settings per-channel
Stereo Link state per-channel
Delay Group setting per-channel
Clock Source setting
Sample Rate setting
MADI process order setting
Device order setting
Channel Name
All screen preferences (as set in the Hardware tab
within Settings View)
All MIDI preferences (as set in the MIDI tab within
Settings View)
All Plug-Ins preferences (as set in the PLUG-INS
tab within Settings View)
Snapshot Key Commands
At any time (not just in Snapshots view), two key commands can be executed for saving
the current Snapshot in place (SAVE), or saving the current s\Snapshot as a new Snap-
shot (SAVE AS).
Key Command Name Key Command Description
Save Snapshot COMMAND+S Saves the current snapshot in place
Save Snapshot As... COMMAND+SHIFT+S Saves the current snapshot as a new snapshot with
a new name and/or location