Universal Audio Realtime Rack - Manual (Page 135)

Realtime Rack Manual Chapter 6: Using UAD Powered Plug-Ins 135
The UAD plug-in status bar (at bottom)
Adjusting Parameters
The parameter settings within each UAD Powered Plug-In can be adjusted to achieve a
desired effect. Parameter values are easily modified by dragging sliders, rotating knobs,
clicking switches and buttons, or by selecting values in a drop-menu. The functions of all
parameters are detailed in the UAD Plug-Ins Manual.
The parameter adjustment style can be Circular, Relative Circular, or Linear. For more
information, see
“Controls Mode Menu” on page 119 .
Note: To increase resolution when adjusting rotary controls in circular and relative
circular modes, increase the radius of the mouse relative to the knob while drag-
ging (i.e. move the mouse farther away from the knob while dragging).
Text Entry
Parameter values can be modified directly with text entry. To enter a parameter value us-
ing text entry, single-click the parameter value text. The text value will highlight, indicat-
ing it is ready to receive a new value. Type in a new value, then press Return, Enter, or
Tab, or click outside of the text box. Press Esc if you want to revert to the prior setting
without entering the new value.
Values entered via text entry are rounded to the closest significant digit. If an entered
value is out of range, it will be ignored.
To enter time values, the units must be specified. m =milliseconds, and s = seconds.
Examples: 400 milliseconds = 0.400s or 400m; 1.5 seconds = 1.5s or 1500m.
Scroll Wheel
If your mouse has a scroll wheel, it can be used to adjust knob and slider controls if the
host application supports this functionality. Place the mouse cursor over any knob or
slider control to increment or decrement the parameter value with the scroll wheel.