Universal Audio Realtime Rack - Manual (Page 82)

Realtime Rack Manual Chapter 4: Realtime Rack Application 82
Channel View
Channel View displays the plug-ins, channel strips, I/O gains, and other settings within a
single channel. Channel View is used to assign and edit UAD plug-ins and manage plug-
ins preset settings.
The channel that is currently being viewed can be navigated with the Channel Bar. The
currently selected channel is highlighted in blue in the Channel Bar.
Typical appearance in Channel View. In this screenshot, Single view is active and the
plug-in tab is selected so the plug-in interface parameters can be adjusted.
Navigating to Channel View
Channel View can be entered using any of these methods.
• Choose Channel View from the View Menu
• Click any Channel Select button in the Channel Bar
• Double-click any channel in the Meter Bridge
• Click any insert slot in Inserts View
• Click any insert plate in Universe View
Tip: When Channel View is entered using any of the above methods (except via
View Menu), the channel is automatically selected and ready for editing.
Selecting Channels within Channel View
In Channel View, the currently selected channel is displayed. To select any channel for
viewing, editing, and/or assigning the plug-ins inserted the channel from within Channel
View:
1. Bring the channel into the Current Bank by navigating with the thin blue Bank Bar
2. Click any Channel Select button in the Channel Bar to select the channel.
Shortcut: Double-click any Input Meter in the Meter Bridge to enter Channel view
and select that channel for editing.