Universal Audio Realtime Rack - Manual (Page 111)

Realtime Rack Manual Chapter 4: Realtime Rack Application 111
Recall Panel
The Recall Panel displays the Active Snapshot and the Snapshot that
is primed and ready to be loaded. It also contains the Recall but-
ton to load the primed Snapshot, and navigation buttons for priming
Snapshots.
Active Snapshot Display
The Active (currently loaded) Snapshot is displayed in the blue CUR-
RENT panel along with its MIDI Program Change slot number prefix.
The panel is blue to correspond with currently loaded Snapshot as
displayed in the Snapshot column.
Tip: The currently loaded Snapshot is also displayed in the Info
Bar in all Views.
Primed Snapshot Display
The Primed (selected, but not loaded) Snapshot is displayed in the
black PRIMED panel along with its MIDI Program Change slot num-
ber prefix.
This display is continuously updated as available Snapshots are navigated. The Primed
Snapshot is loaded when the RECALL button is pressed.
Recall Snapshot Button
The green RECALL button is used to load the Primed Snapshot shown in the black
PRIMED display.
Up/Down Buttons
These buttons can be used to navigate and prime Snapshots in the Snapshots column.
Snapshots in the column are highlighted in gray when as they are navigated and primed.
When using these buttons and the last (or first) Snapshot in the column is reached, navi-
gation continues through the contents in the next (or previous) Snapshot folder.
Tip: The equivalent up/down functions can be performed with the QWERTY Up/
Down arrow keys when the Snapshots column has focus.
The Recall Panel