Universal Audio Realtime Rack - Manual (Page 86)

Realtime Rack Manual Chapter 4: Realtime Rack Application 86
Channel Signal Flow
Audio signals in a channel flow through the inserts serially from top to bottom. Therefore,
if more than one plug-in is inserted in a channel, the location of a plug-in within the
inserts can impact the sound of the channel.
Insert Reordering
Inserts can be reordered to change the location of a plug-
in within the channel signal flow. For example, its possible
to move an EQ to be located before or after a compressor to
change the processed sound.
To reorder the inserts, click, hold, and drag any Insert Button
up or down with the mouse. Existing assignments are automatically reordered as needed
to accommodate the change. Inserts can be reordered in Single view and Channel Strip
view.
Note: This operation can only be performed in EDIT mode.
Insert State Indications
The color of each button, as well as italic plug-in names, indicate
of the current state of each insert. The possible states are shown at
right and described below.
Selected (light blue) – The plug-in is active and processing audio,
and the insert is selected for editing. The PULTEC EQP-1A insert
button at right indicates this state.
Active (light gray) – The plug-in is active and processing audio. The
TELETRONIX LA-2A GRAY insert button at right indicates this state.
Inactive (dark blue) – The plug-in has been disabled by the power
button in Channel View, and the plug-in name is italicized, and the
plug-in displays a
Status Bar in the PLUG-IN Tab. The EMT 250
insert button at right indicates this state.
Note: Disabling a plug-in via the power control within the plug-
in interface (versus the power button in Channel View) does not
change the background color nor italicize the name.
Disabled (red) – The plug-in is disabled because there is not enough
UAD resources, it is unlicensed and the demo has expired, and/or
the UAD authorization needs updating. The plug-in name is also italicized and the plug-
in displays a
Status Bar in the PLUG-IN Tab. The MANLEY MASSIVE PASSIVE insert
button in the screenshot indicates this state.
Italic Name – The plug-in is not processing audio because it is either inactive or dis-
abled.
Empty (+) – The insert is not populated with a plug-in. Click the plus ”+” symbol to as-
sign a plug-in into the slot.