Universal Audio Realtime Rack - Manual (Page 141)

Realtime Rack Manual Chapter 6: Using UAD Powered Plug-Ins 141
Modes with Tempo Sync
The UAD DM-1 and UAD DM-1L plug-ins (and DM-1 within CS-1) have a Mode menu
that switches the plug-in operation between delay, chorus, and flanger mode. In these
plug-ins, when the Mode is set to DualDelay and PingPong, the delay Time and modula-
tion Rate parameters are simultaneously available for Tempo Sync.
However, when the plug-in is set to a Chorus or Flanger mode, only the Rate is available
for Tempo Sync. This enables the more typical and musical chorus/flange effect by only
syncing the modulation Rate to the tempo while the delay time remains constant.
Roland RE-201 Sync
When the RE-201is in Tempo Sync mode, note values
can be imprecise due to the fixed tape head rela-
tionships. Values that are imprecise approximations
(but are within the available delay time range) are
displayed with a “+” or “-” symbol. The leading head in the current mode is accurately
synced; the other values are based on the fixed tape head relationship. Note that when
a parameter note value is out of range of the current tempo note value, the note value
flashes (instead of in parentheses on a red background).