Universal Audio Realtime Rack - Manual (Page 52)

Realtime Rack Manual Chapter 4: Realtime Rack Application 52
Meter Bridge
The Meter Bridge is always displayed across the top of all screens. The Meter Bridge
contains Input Meters for all MADI channels in the system and can be used for naviga-
tion within Realtime Rack.
The Meter Bridge elements as displayed with a 16-channel (single unit) system
Input Meters
Each vertical green meter indicates input signals that are present in the associated MADI
channel. The Meter Bridge automatically expands to display additional MADI channels
when two, three, and/or four Realtime Rack hardware units are connected to the system.
Tip: Single-click the input meters to enter the most recently selected bank view.
Additional (empty) MADI channels can be manually added to the Meter Bridge by click-
ing the “+” button at View Menu>Settings>Hardware Tab. This provision is typically used
to add empty MADI channels so offline setups can be configured.
Mono/Stereo
A dual/split meter indicates two channels are stereo linked. When a dual/split meter is
shown, the meter represents the left and right channels of the stereo signal.
Bank Bar
The blue Bank Bar visually represents all channels in the
Current Bank . The Bank Bar is
used for Current Bank navigation within all View screens. For details, see page 54 .
Meter Bridge Navigation
The Meter Bridge can be used as shortcuts for the functions below:
• Jump to any channel – Double click any channel’s Input Meter in the Meter
Bridge to jump directly to Channel View and select the channel.
To return to Bank View:
• Return to Bank View – Single click anywhere in the Input Meters area to return to
the previously selected
Bank View (Inserts, Gains, or Delay Groups).
Stereo
Channel
Meter
Signal
Present
(green)
MADI Channel
Number
No
Signal
(black)
Mono
Channel
Meter
Channel
Input
Level
Meters
Bank Bar
(blue)