Universal Audio Realtime Rack - Manual (Page 138)

Realtime Rack Manual Chapter 6: Using UAD Powered Plug-Ins 138
Tempo Sync
Overview
The time-based parameters of numerous UAD Powered Plug-Ins can be synchronized to
the tempo of the Realtime Rack software using the Tempo Sync feature.
Note: The tempo used by UAD plug-ins that are set to Tempo Sync is specified in
the Settings>MIDI panel within the Realtime Rack software application.
When Tempo Sync is activated, the time-based parameters that are available for syn-
chronization are changed to note duration values, and will sync to the tempo of the host
application using the displayed note value.
The Tempo Sync feature within UAD DM-1L
Tempo Sync Plug-Ins
Tempo Sync is supported in the UAD plug-ins listed in the table below.
UAD CS-1 UAD Moog Filter
UAD Cooper Time Cube UAD Moog Filter SE
UAD EP-34 UAD MXR Flanger/Doubler
UAD DM-1 UAD Roland RE-201
UAD DM-1L UAD RS-1
UAD plug-ins with Tempo Sync
Sync Activation
To activate Tempo Sync, click the “Sync” button within the plug-in interface. The Sync
button “LED” will illuminate and the time parameters will change from a time-based
display to a note value, as shown on
page 140 .
Note: When Tempo Sync is activated, the plug-in will automatically switch the
time or rate parameter(s) to the nearest available note value(s) given the range of
the parameter in question and the current tempo.