Asus RS161-E4/PA2 - Manual (Page 103)

ASUS RS161-E4/PA2 5-39
5.7.3 Boot Settings Configuration
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quick Boot [Enabled]
Full Logo Display [Enabled]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
POST Errors [Enabled]
Setup Prompt [Enabled]
Interrupt 19 Capture [Disabled]
→← Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Allows BIOS to skip certain
tests while booting.
This will decrease the time
needed to boot the system.
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set to
[Disabled], BIOS performs all the POST items. Configuration options: [Disabled]
[Enabled]
Full Logo Display [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock. Configuration
options: [Off] [On]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse. Configuration options:
[Disabled] [Enabled] [Auto]
POST Errors [Enabled]
Wait for F1 Key to be pressed if error occurs. Configuration options: [Disabled]
[Enabled]
Setup prompt [Enabled]
Display “Press DEL to run Setup“ in POST. Configuration options: [Disabled]
[Enabled]