4 menu items, 5 sub-menu items, 6 configuration fields – Asus RS161-E4/PA2 User Manual

Page 77: 7 pop-up window, 8 scroll bar, 9 general help

Advertising
background image

ASUS RS161-E4/PA2

5-13

System Date [Mon, 06/27/2005]

System Time [08:52:30]

Floppy A: [Disabled]

IDE Configuration

Primary IDE Master [ATAPI CDROM]

Primary IDE Slave [Not Detected]

Secondary IDE Master [Not Detected]

Secondary IDE Slave [Not Detected]

Tertiary IDE Master [Hard Disk]

Fourth IDE Master [Hard Disk]

Fifth IDE Master [Not Detected]

Sixth IDE Master [Not Detected]

System Information

Use [ENTER], [TAB]

or [SHIFT-TAB] to

select a field.

Use [+] or [-] to

configure system date.

5.2.4 Menu items

The highlighted item on the menu bar

displays the specific items for that

menu. For example, selecting Main

shows the Main menu items.
The other items (Advanced, Power,

Boot, and Exit) on the menu bar have

their respective menu items.

5.2.5 Sub-menu items

A solid triangle before each item on any menu screen means that the iteam has

a sub-menu. To display the sub-menu, select the item and press <Enter>.

5.2.6 Configuration fields

These fields show the values for the menu items. If an item is user- configurable,

you can change the value of the field opposite the item. You cannot select

an item that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected.

To change the value of a field, select it then press <Enter> to display a list

of options. Refer to “4.2.7 Pop-up window.”

5.2.7 Pop-up window

Select a menu item then press <Enter> to display a pop-up window with the

configuration options for that item.

5.2.8 Scroll bar

A scroll bar appears on the right side

of a menu screen when there are items

that do not fit on the screen. Press the

Up/Down arrow keys or <Page Up>

/<Page Down> keys to display the other

items on the screen.

5.2.9 General help

At the top right corner of the menu screen is a brief description of the

selected item.

Main menu items

Pop-up window Scroll bar

Advanced PCI/PnP Settings

WARNING: Setting wrong values in below sections

may cause system to malfunction.

Plug And Play O/S [No]

PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
PCI IDE BusMaster [Enabled]

Advertising