Asus RS161-E4/PA2 - Manual (Page 41)

2-25 ASUS RS161-E4/PA2
2.9.6 Motherboard
To uninstall the motherboard:
1. Disconnect all the pre-connected cables from the motherboard. See section “2.7
Cable connections” for illustration.
2. Uninstall all the devices from the motherboard including the CPU and heatsink,
riser card bracket, and DDR DIMMs. Refer to the corresponding sections for
instructions on removing these components.
3. Use a Phillips (cross) screwdriver to remove the screws that secure the
motherboard to the base of the chassis.
Refer to the illustration below for the location of the motherboard screws.
4. Carefully lift the motherboard out
of the chassis.
R
KFN4-DRE