4 rackmounting the server – Asus RS161-E4/PA2 User Manual
Page 46
Advertising
Chapter 3: Installation options
3-4
3.4 Rackmounting the server
To mount the server to the rack:
1. Firmly hold the server on both sides and insert the rear panel side to the
front end of the rack rail, then carefully push the server all the way to
the back until the front panel fits the front end of the rack, and the rack
screws on the server match the middle hole on the rack..
2. Tighten the two rack screws to
secure the server to the rack.
Rack screw
Advertising