Asus RS161-E4/PA2 - Manual (Page 90)

5-26 Chapter 4: BIOS setup
OnBoard PCIE LAN Boot ROM [Enabled]
Allows you to enable or disable the option ROM in the onboard PCI Express
LAN controller. Configuration options: [Disabled] [Enabled]
5.4.4 USB Configuration
The items in this menu allows you to change the USB-related features. Select
an item then press <Enter> to display the configuration options.
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
USB Configuration
USB Devices Enabled:
None
USB Controller Suport [USB 1.1+USB 2.0]
Legacy USB Support [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
→← Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the USB Devices Enabled
item shows None.
USB Controller Support [USB 1.1+USB 2.0]
Sets or disables the USB controller support. Configuration options: [Disabled]
[USB 1.1 Only] [USB 1.1+USB 2.0]
Legacy USB Support [Enabled]
Allows you to enable or disable support for legacy USB devices. Setting
to [Auto] allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is enabled.
If no USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [HiSpeed ] [FullSpeed ]
Enable USB Controller