Asus RS161-E4/PA2 - Manual (Page 29)

2-13 ASUS RS161-E4/PA2
5. Carefully insert the drive tray and
push it all the way to the depth of
the bay until just a small fraction of
the tray edge protrudes.
6. Push the tray lever until it clicks, and secures the drive tray in place. The drive
tray is correctly placed when its
front edge aligns with the bay edge.
7. Repeat steps 1 to 6 if you wish to
install a second SATAII drive.
When installed, the SATAII connector on the drive connects to the
SATAII interface on the backplane.
8. Connect the bundled SATAII cables to the connectors on the SATAII backplane.
Refer to section “2.8 SATAII backplane cabling” for information on the SATAII
backplane cable connections.
SATAII interface
on the backplane