3 device fan with dummy case – Asus RS161-E4/PA2 User Manual
Page 37
Advertising
2-21
ASUS RS161-E4/PA2
2.9.3 Device fan with dummy case
The device fan for the memory module(s) comes with a dummy case that
allows it to fit in the fan cage. Follow these instructions when replacing this
fan.
1. Uninstall the fan following the instructions in the previous section.
2. Pull the dummy case to the
d i r e c t i o n o f t h e a r r o w t o
disengage its pegs from the
device fan.
3. Replace the device fan.
To reinstall the device fan with the dummy case:
1. Insert the dummy case pegs into
to the device fan holes until they
fit in place.
Peg
2. The device fan and dummy case
look like this when put together
correctly.
3. Reinstall the device fan by
following the instructions in the
previous section.
Peg
Advertising